How To Add Text To Video In Blender

Adding Text Elements To Videos In The Video Sequence Editor?

It has to be said that the video sequence editor in Blender is non the near powerful video editing software that you volition find, but it is able to perform many of the more than unremarkably used tasks when editing movie files from cut clips to manipulating their scale. One useful tool for whatsoever video editor is the power to add text overlays to your film file.

Text is an element that can be added as an independent layer to your video sequence past going to the add bill of fare in the video sequence editor and selecting the text element. So y'all can position the text in your timeline, adjust its length, and add boosted effects such as fading or adjusting the font, size, and color.

There are quite a few things that y'all can do with text elements to help make your movie files await more professional person, and a fair few scenarios where yous would need to use text elements as overlays to your videos.

How To Overlay Your Text Elements On Tiptop Of Your Video?

As with most video editors, your videos, elements, and effects all appear as strips that tin be positioned anywhere on your timeline. This means that when you add a text element yous can position information technology at whatsoever point in your video. You have a serial of numbered channels for which to place your strips, and these channels act every bit layers, with a higher number being positioned on top of a lower i.

This means that when y'all add an element similar text to your project, it needs to exist positioned in a channel above the main strip to be visible.

Adding text or other elements is as piece of cake as adding an image or a motion-picture show file, in fact, it is located in the aforementioned place! To add your text, get to the add menu located in the video sequence editor. You can reach the card by using the hotkey Shift + A as well. From the add menu select text and it will be positioned wherever your active frame is in the timeline.

You can click and drag to motion the text clip across your timeline to wherever you need information technology. For example, if you lot are using the text chemical element to add credits then you would want to position the clip towards the end of the video, or only after if you wanted to combine information technology with a background image/color.

Clips can too be adjusted in terms of their length. you will find the ends of each prune are highlighted in a slightly unlike color, so click and elevate from the ends to adjust the elapsing of the text.

When yous have both positioned your text clip and define its length, you'll and so need to change the parameters of the text element itself, such equally the font, color, and what the text actually reads.

How To Edit Your Text Elements Font And Color

Much like the 3D viewport and almost other editors in Blender, the video sequence editor has a side panel that may at offset be hidden from view. If this is the instance, then you tin press the universal N key to open up upward the side console. From the side panel, you lot can edit the parameters of the selected clip. which in this case is the text chemical element.

The first selection that yous will be able to change is what the text actually reads under the co-operative titled effect strip. Simply blazon in what yous want to be displayed and then press enter to alter to the new wording. Beneath that, yous have additional branches for the mode and layout of the text.

The Style Of The Text

The options that are found under the style branch relate to the appearance of the text. The first option that volition be available to you is the ability to modify the font of the text. Click on the open push button to bring up the file browser in a separate window.

If you lot are using the Windows operating system, then the directory should be sent to the fonts library. If information technology is not, then you tin type in If you are using the Windows operating system, then the directory should be sent to the fonts library. If it is not, so you can type in C:\WINDOWS\Fonts\ into the bar at the top to go straight there. If it is not set to do this automatically then go to Preferences > File Paths > Information > Fonts and paste in the same location, and so close the preferences panel.

In addition, you tin brand your selected font either bold or italic with the buttons located to the side of the font, much similar in a traditional typing application.

Of course, you lot can do more than just alter the font. You can as well change the size of the text equally information technology appears on your video using the numerical value, as well equally changing the color with the help of the color wheel. This is one aspect of text creation that is really better than Word because it'southward easy to choose any color that you want with the color wheel.

At that place are a few other stylings that you can change here. A popular tool is to add a shadow to your text, which makes it much easier for the text to stand out from the video background.

Yous can as well create a box to surroundings your text to further help distinguish it from the background, but while you can change the size and the color of the box, it's not every bit easy on the middle as using text-shadow.

How The Text Is Layed Out

The options that are found nether the layout branch relate to the positioning of the text within its bounding box. Note that this is not to exist confused with the texts positioning on the screen.

Text objects are stored inside a bounding box which is in turn much easier to grab, rotate, and scale. The layout options relate to the text inside of its own box.

If you dispense the location value of the text on either axis, you will be able to move that text inside its box. As y'all achieve the border though the text will begin to disappear out of sight.

This is useful really because it allows you lot to add animations using the location of the text within its bounding box area. The anchor settings underneath act equally the origin point for the text, but these are fixed areas within the bounding box

Compositing

This branch merely has one option to worry nigh, but it is an important one. It is here that you lot can modify the blend style, which is how the text element reacts to other elements in the sequence where at that place is overlap.

By default, the alloy fashion should be set to alpha over. If you cannot see your text in your preview and then it is likely that the blend mode is set up to something different, and then make sure to ready it to blastoff over equally a starting point.

The unlike blend modes tin can change the look and color of your text, and then experiment to run into what modes you might like to use in the future.

Transforms

An important distinction to brand is the difference betwixt the layout options and the transform options. Merely put, the layout relates to the text within its bounds, while the transform is connected to the box that stores the text.

These are the settings that you lot will probable pay more attention to. The position values are basically the same as location values, and place your text wherever it needs to get in the preview. The calibration values are used to make the text larger or smaller on each axis.

If the X and Y values are not equal, then the text itself volition brainstorm to stretch along the axis with the greater value. Yous can utilise this to create animated stretching for your text as a custom transition.

Rotation is a single value since you tin can just rotate on a single plane in 2 dimensions. This makes it easy to control the rotation of the text.

While information technology is not at the top of the listing of transform tools, the origin is the ane that affects how the over transform tools carry here, with the exception of the position.

Past changing your origin, you change where your text can scale and rotate from. This is useful when you lot want to rotate text a certain manner for an blitheness.

Then y'all accept the mirror option, which allows you to flip the text on either the X or Y axis, creating a mirrored issue for the text.

Ingather

With the ingather tools, y'all can control the size of the text box that holds your text element. You can reposition the acme, bottom, left, and right borders of the text box. Doing so will impact the tools used in the layout branch, equally making the text box larger will permit greater liberty of movement for the text within that box.

If you desire to learn more than nigh Blender you can check out our course on Skillshare past clicking the link hither and get ane calendar month free to the unabridged Skillshare library.

Adding Transitions To Your Text Elements

1 thing that editors volition well-nigh always do is add a transition for any text elements that they create, regardless of the purpose for that text element. Just having text pop upwards out of nowhere on the screen creates a very low-quality look for the video and is uncomfortable for the human eye.

Using transitions makes information technology all just that fiddling bit more professional and in that location are a variety of ways in which you tin create these transitions.

In Blender yous take transitions and you besides have fade effects as ii sub-menus. Both of these can be establish under the add menu.

While we refer to information technology as a transition, nosotros won't exist using the transition effects themselves for a single text object. This is because in Blender the transition options focus on moving from i prune to the next, just our text just overlays the main video, so these transitions are not usable here.

Instead, we tin can utilise the fade furnishings to create simple fade in and fade out's to improve the await of our text elements. For the most command, position your agile frame to where yous desire the fade-in result to stop, then press Shift + A to open the add menu, go to Fade and select To Electric current Frame.

Then for the fade out go to the frame where y'all want to starting time and then return to the frame menu where you will select From Current Frame.

In addition to the fade effects that allow for easier transitions for text, you can also create your own animated transitions by manipulating options in the side console such as the transforms or the style options.

To exercise this click on the dot next to a parameter, like the text size, to insert a keyframe to that parameter. Then change to another frame, alter the setting, and printing the dot over again to add the 2nd keyframe. At present if you play the clip you should see the blitheness created with that parameter.

Cheers For Reading Our Article

We capeesh you taking the fourth dimension to read through our article. Below we accept gathered a pocket-sized list of additional topics that we think y'all may be interested in.

Is The GLTF File Format Compatible In Blender?
Is Blender The Only Gratis 3D Software Out There?
Where Does Blender Get All Of Its Coin From?
Why Practice Materials Become Deleted When You Leave Blender?
Does Blender Use The GLTF File Format?

Are There Any Free Render Farms Out There?

If you lack the time or the hardware to complete the renders for your latest project, whether that be an prototype or animation, you will likely be required to use

Proceed Reading

24/05/2022
Why Can't I Motion My Objects In Blender?

As you would no dubiety expect, being able to work in 3D space on your computer is a very unlike skillset from working in 2nd space, which is familiar with

Proceed Reading

24/05/2022
Which 3D Software Is Best Suited To 3D Animation?

The quality of 3D animations has connected to develop over the past three decades, with sometime classics like the original Toy Story paving the way for all the future animated

Go along Reading

24/05/2022